ToolExpert

E-Shop

Contact

Literature

Download comprehensive information quickly and easily

Our download area offers you a comprehensive range of information on all things relating to FRAISA. Product brochures, data sheets, and catalogs can be downloaded here in next to no time.

Literature
High-performance milling tools 2023 (US Version, Volume 16)

High-performance milling tools 2023 (US Version, Volume 16)

The new “2023 High-performance milling tools” catalog showcases the entire range of FRAISA’s top-quality…

Catalogue supplement ToolSchool Crossover (US Version, Volume 16)

Catalogue supplement ToolSchool Crossover (US Version, Volume 16)

Our “ToolSchool Crossover” clearly demonstrates how you can and should switch from the products you have…

High-performance milling tools 2023

High-performance milling tools 2023

The new “2023 High-performance milling tools” catalog showcases the entire range of FRAISA’s top-quality…

Catalogue supplement The ToolSchool recommends

Catalogue supplement The ToolSchool recommends

Our “ToolSchool-Recommendation” clearly demonstrates how you can and should switch from the products…

Carbide Drills and Thread-Cutting Tools 2023

Carbide Drills and Thread-Cutting Tools 2023

The new Carbide Drills and Thread-Cutting Tools 2022 catalog also shows you our wide range of tools…

FRAISA E-Cut – the versatile range (US Version)

FRAISA E-Cut – the versatile range (US Version)

The FRAISA E-Cut milling concept combines a very wide range of applications with precisely calculated…

The new XFeed – High-feed Productivity

The new XFeed – High-feed Productivity

With its new XFeed milling cutter, FRAISA has found the perfect solution for high-feed machining of medium-…

MFC Multifunctional High-performance Milling

MFC Multifunctional High-performance Milling

Multifunctional MFC tools from FRAISA have a significant status within the industry. Due to its high level…

E-Cut Alu – maximum efficiency in aluminum machining

E-Cut Alu – maximum efficiency in aluminum machining

FRAISA presents the E-Cut Alu family for machining aluminum: The totally new, smooth-edged, high-performance milling…

FRAISA ReTool®Services

FRAISA ReTool®Services

Living the circular economy for precision tools – made by FRAISA: The three sustainable offers of the FRAISA…

Autonomy - Machining without human process monitoring

Autonomy - Machining without human process monitoring

Maximum economy for autonomous work processes

SX High-performance Milling Cutter (US Version)

SX High-performance Milling Cutter (US Version)

The new SX high-performance milling cutter from FRAISA has been developed specifically for machining…

High-performance milling of aluminium AX-FPS (US Version)

High-performance milling of aluminium AX-FPS (US Version)

The new AX-FPS milling cutter opens up new performance horizons in the field of aluminum machining. The…

AX high-performance milling cutters (US Version)

AX high-performance milling cutters (US Version)

The AX range of aluminum milling cutters has undergone continuous development by FRAISA during the last…

Designed to run – the new Favora®- tool concept

Designed to run – the new Favora®- tool concept

The Favora® class stands for maximum cost-effectiveness. By cleverly integrating the very latest production…

HX and XSpeed-H

HX and XSpeed-H

The HX and XSpeed-H are perfect additions to the HX family, which has been specifically designed for high-performance…

Microcut – Smart design

Microcut – Smart design

FRAISA’s new Microcut tools offer the perfect solution for every challenge faced when the cost of machining materials…

SX – High Dynamic Cutting HDC

SX – High Dynamic Cutting HDC

With its multi-tooth SX high-performance milling cutters, FRAISA has developed a completely new milling…

Xtap – one tap for everything

Xtap – one tap for everything

With the Xtap, FRAISA is launching a fundamentally new design of universal tap that’s based on state-of-the-art…

Favora® Limited Edition – Universal milling cutters

Favora® Limited Edition – Universal milling cutters

The Favora® Limited Edition from FRAISA is a small range of tools that fits perfectly in today’s world.…

FRAISA E-Cut – the compact range

FRAISA E-Cut – the compact range

The FRAISA E-Cut milling concept combines a very wide range of applications with precisely calculated…

AX high-performance milling cutters - New horizons for quality and process reliability

AX high-performance milling cutters - New horizons for quality and process reliability

The AX range of aluminum milling cutters has undergone continuous development by FRAISA during the last…

Sphero-Alu – precision & performance in aluminum

Sphero-Alu – precision & performance in aluminum

Well equipped for all milling operations that can be applied to aluminum: The new Sphero-Alu ball nose…

High-feed cutting in hardened steels with XFeed-H

High-feed cutting in hardened steels with XFeed-H

With the new XFeed-H milling cutter, FRAISA has produced the perfect tool for realizing HFC processes…

NX face-finishing milling cutter

NX face-finishing milling cutter

FRAISA’s NX face-finishing cutter is the latest innovation in finishing. The new milling cutter mills…

SpheroX Ball Nose End Mill

SpheroX Ball Nose End Mill

The new generation of SpheroX milling cutters opens up some impressive new prospects: Where classic…

MicroHX – new performance horizons for the milling of super-hard molds

MicroHX – new performance horizons for the milling of super-hard molds

With the MicroHX ball nose end mills from FRAISA, very hard materials with a hardness of HRC > 60 can…

Micro-milling of graphite MicrospheroXG and MicrotoroXG

Micro-milling of graphite MicrospheroXG and MicrotoroXG

The clever solution for high-precision milling of graphite materials now comprises 219 items with diameters…

High-precision micro-milling MicroX

High-precision micro-milling MicroX

We are presenting our attractive MicroX range in a greatly expanded form – a success story in four dimensions!

Circular arc milling for brilliant finishing ArCut X

Circular arc milling for brilliant finishing ArCut X

ArCut X is a conical end mill whose curved surface area has a radius of curvature of up to 1,000 mm.

[Upgrade] High-performance milling of aluminium AX-FPS

[Upgrade] High-performance milling of aluminium AX-FPS

The new AX-FPS milling cutter opens up new performance horizons in the field of aluminum machining. The…

HX-NVS and HX-RNVS – new horizons for the machining of high-hard steels (US Version)

HX-NVS and HX-RNVS – new horizons for the machining of high-hard steels (US Version)

The cylindrical HX-NVS roughing mill from FRAISA lets you machine steels with a hardness rating higher…

Multi-Functional Cutting MFC-R (US Version)

Multi-Functional Cutting MFC-R (US Version)

Thanks to the expansion of the range of tools with corner radius, MFC-R, up to 132 different application…

SX High-performance Milling Cutter - The specialist for machining stainless steels

SX High-performance Milling Cutter - The specialist for machining stainless steels

The new SX high-performance milling cutter from FRAISA has been developed specifically for machining…

HX: 10 times faster penetration in high-hard steels with HPC and HDC machining

HX: 10 times faster penetration in high-hard steels with HPC and HDC machining

Our smooth-cutting HX-NVS mill is ideal for machining hard materials for the worlds of mold-making,…

MFC – Multi-Functional Cutting. Up to 96 different applications per tool

MFC – Multi-Functional Cutting. Up to 96 different applications per tool

Interacting with state-of-the-art CAD/CAM systems, MFC tools offer an incomparable level of multi-functionality,…

Finishing cutters for vibration-free surfaces in steel machining Multicut XF (US Version)

Finishing cutters for vibration-free surfaces in steel machining Multicut XF (US Version)

The new Multicut XF can be applied in circumstances with very stringent requirements with regard to…

Finishing cutters for vibration-free surfaces in steel machining Multicut XF

Finishing cutters for vibration-free surfaces in steel machining Multicut XF

The new Multicut XF can be applied in circumstances with very stringent requirements with regard to…

Finishing cutters for vibration-free surfaces in aluminum machining Multicut XA

Finishing cutters for vibration-free surfaces in aluminum machining Multicut XA

Multicut XA is our redesigned finishing cutter for machining aluminum. It completes FRAISA’s successful…

High-performance roughing mills contoured with penetration edge for helical interpolation and ramping NB-RPS SupraCarb®

High-performance roughing mills contoured with penetration edge for helical interpolation and ramping NB-RPS SupraCarb®

The NB-RPS SupraCarb® mill expands our range of tools equipped with a high-performance penetration edge.…

Diamond-coated ball nose end mill for cutting hard metals SpheroCarb

Diamond-coated ball nose end mill for cutting hard metals SpheroCarb

Diamond-coated ball nose end mills for the allround processing of hard metals and technical ceramics.

High-feed mills for high-tensile and hardened steels of up to 60 HRC XFeed / XFeed-R

High-feed mills for high-tensile and hardened steels of up to 60 HRC XFeed / XFeed-R

The new HFC end mills are preferably used in high feed processes where high metal removal rates need…

CVD ball nose end mills for cutting carbides Sphero-CVD

CVD ball nose end mills for cutting carbides Sphero-CVD

The innovative Sphero-CVD diamond tools from FRAISA are rough-milling/ finishing tools that have been…

3D roughing mills with HSC corner radius for tool- and mold-making Toro-X

3D roughing mills with HSC corner radius for tool- and mold-making Toro-X

The Toro-X milling tools were developed for 3-D milling processes in which the HSC strategy is used.…

Super-precision ball nose end mills with radius tolerance of ± 0.003 Sphero-XP

Super-precision ball nose end mills with radius tolerance of ± 0.003 Sphero-XP

The Sphero-XP ball nose end mill is based on the Sphero-XF finisher and is designed for finishing extremely…

Cylindrical end mills for universal machining with penetration edge for helical interpolation and ramping NVS

Cylindrical end mills for universal machining with penetration edge for helical interpolation and ramping NVS

NVS is an “easy-cut” tool and as such, suitable for soft and stainless steels, hardened steels, titanium, annealed…

Ball nose end mills for finishing and roughing hard steels of up to 40–70 HRC Sphero-X

Ball nose end mills for finishing and roughing hard steels of up to 40–70 HRC Sphero-X

Through its flexible use in high-performance machining, great savings potentials can be realized when…

Mills for high-dynamic cutting with constant tool wrap HDC

Mills for high-dynamic cutting with constant tool wrap HDC

Fraisa uses Fraisa HDC to provide the data for the high dynamic cutting strategy. Most CAM systems…

High-performance milling in difficult-to-cut materials ZX

High-performance milling in difficult-to-cut materials ZX

The new milling tools ZX made of solid carbide were developed specifically for the efficient machining…

High-performance mills for integral aluminum components AX

High-performance mills for integral aluminum components AX

Thanks to the technological innovations of AX, superior results with regard to productivity, cost reduction,…

High-performance roughing mills contoured for HPC machining in steel materials SupraCarb

High-performance roughing mills contoured for HPC machining in steel materials SupraCarb

The new SupraCarb® roughing cutter sets new standards for rough machining steel materials. The ultra-tough carbide,…

Lightform Steel Thread-Formers

Lightform Steel Thread-Formers

Thread forming is more reliable and more cost-effective than thread cutting. With its redesigned Lightform…

Spiral flute drills Supradrill® U

Spiral flute drills Supradrill® U

Spiral flute drills of the Supradrill® U type are solid carbide drills, which have been designed especially…

HFC indexable insert milling tools

HFC indexable insert milling tools

The main application of the HFC milling system is high-performance rough machining. The variety of materials which…

Drilling in steel, aluminum, stainless steel and titanium

Drilling in steel, aluminum, stainless steel and titanium

For machining materials Rm < 850 to 1500, HRC 48 bis 56, Inox Stainless and titanium.

Deep-hole drilling in steel, aluminum, stainless steel and titanium

Deep-hole drilling in steel, aluminum, stainless steel and titanium

For machining materials Rm < 850 to 1300.

Microdrilling in steel, aluminum, stainless steel and titanium

Microdrilling in steel, aluminum, stainless steel and titanium

For machining materials Rm < 850 to 1300, Inox Stainless and aluminium.

Step drilling for tapped holes in steel, aluminum, stainless steel and titanium

Step drilling for tapped holes in steel, aluminum, stainless steel and titanium

For machining materials Rm < 850 to 1300 and aluminium.

Spot drilling and countersinking/counterboring

Spot drilling and countersinking/counterboring

For machining materials Rm < 850 to 1300, Inox Stainless and Aluminium.

Metric coarse thread M

Metric coarse thread M

For machining materials Rm < 850-1500, HRC 48- >60, Aluminium Alloy, Copper, Aluminium Cast, Titanium,…

Metric coarse thread M / MJ

Metric coarse thread M / MJ

For machining materials Rm < 850-1500, HRC 48- >60, Aluminium Alloy, Copper, Aluminium Cast, Titanium,…

Metric fine thread MF

Metric fine thread MF

For machining materials Rm < 850-1100, HRC 48- >60, Inox Stainless and Cast Iron.

Whitworth pipe thread cylindrical G

Whitworth pipe thread cylindrical G

For machining materials Rm < 850 to 1500, HRC 48-56, HRC 56-60, HRC > 60, Aluminium > 99%, Aluminium…

Unified thread UNC / UNJC / UNF / UNJF

Unified thread UNC / UNJC / UNF / UNJF

For machining materials Rm < 850 to 1300, Aluminium > 99%, Aluminium Alloy, Aluminium Cast, Copper, Thermoplast…

Unified pipe thread conical NPT / NPTF

Unified pipe thread conical NPT / NPTF

For machining materials Rm < 850 to 1100, Inox Stainless, Aluminium and Copper.

Metric coarse thread for inserts EG M

Metric coarse thread for inserts EG M

For machining materials Rm < 850, Aluminium > 99%, Aluminium Alloy, Aluminium Cast, Copper and Thermoplast.

Cold forming taps M

Cold forming taps M

For machining materials Rm < 850 to 1100 and Stainless or Aluminium > 99%, Aluminium Alloy, Copper and…

Cold forming taps MF / EG M

Cold forming taps MF / EG M

For machining materials Aluminium > 99%, Aluminium Alloy, Copper and CuZn Brass.

Thread milling cutters M / MF / G / UNC / UNF / UN / NPT / NPTF

Thread milling cutters M / MF / G / UNC / UNF / UN / NPT / NPTF

For machining materials Rm < 850 to 1500, HRC 48-56, Inox Stainless, Titanium and Aluminium.

Thread milling cutters with chamfer 45° M / MF / G / UNC / UNF / UN / NPT / NPTF

Thread milling cutters with chamfer 45° M / MF / G / UNC / UNF / UN / NPT / NPTF

For machining materials Rm < 850 to 1500, HRC 48-56, Inox Stainless, Titanium and Aluminium.

Drill/thread milling cutters with chamfer 45° M / MF / G / UNC / UNF / UN / NPT / NPTF

Drill/thread milling cutters with chamfer 45° M / MF / G / UNC / UNF / UN / NPT / NPTF

For machining materials Aluminium Alloy, Aluminium Cast, Copper, Thermoplast and CuZn Brass.

Multi-range thread milling cutters M / MF / G / UNC / UNF / UN / NPT / NPTF

Multi-range thread milling cutters M / MF / G / UNC / UNF / UN / NPT / NPTF

For machining materials Rm < 850 to 1500, HRC 48-56, Inox Stainless, Titanium and Aluminium.

Thread whirler M / G / UN

Thread whirler M / G / UN

For machining materials Rm < 850 to 1500, Inox Stainless, Titanium and Aluminium Nickel-Alloys.

Round indexable insert milling tools

Round indexable insert milling tools

For machining steel, stainless steel, hardened steel, difficult-to-cut materials and aluminium.

Indexable insert milling tools HFC

Indexable insert milling tools HFC

For machining steel, stainless steel, hardened steel and difficult-to-cut materials.

Indexable insert face milling tools

Indexable insert face milling tools

For machining steel, stainless steel, difficult-to-cut materials and aluminium.

Corner/slot indexable insert milling tools

Corner/slot indexable insert milling tools

For machining steel, stainless steel, hardened steel, difficult-to-cut materials and aluminium.

Constant cutting edge length/ diameter ratios

Constant cutting edge length/ diameter ratios

What is a 3xd tool? Simple question, complex answer: In accordance with DIN 6527, the cutting edge length/diameter…

XFeed – High-feed Productivity

XFeed – High-feed Productivity

The ideal solution for highfeed machining of mediumto high-strength steels

MFC High-performance Milling

MFC High-performance Milling

Multifunctionality in new dimensions Penetration and milling with large machining depths of up to…

E-Cut Alu – the perfect tool family

E-Cut Alu – the perfect tool family

Most economical aluminum machining – simple, reliable and free-cutting

E-Cut – efficient and economical

E-Cut – efficient and economical

High-performance machining made simple

FRAISA ReTool®Services

FRAISA ReTool®Services

To extend the tool life cycle and reduce the carbon footprint.

FRAISA ReTool®

FRAISA ReTool®

CO2MPETITIVE – Industrial tool reconditioning service with performance guarantee

FRAISA ReTool®Blue

FRAISA ReTool®Blue

CO2MMITMENT – Recycling for effective Tool2Tool sustainability

FRAISA ReTool®Green

FRAISA ReTool®Green

CO2OPERATION – For the environment through reconditioned tools

100% process monitoring

100% process monitoring

Maximum economy for autonomous work processes

FRAISA ToolExpert® 2.0 – the new online cutting data tool for optimum tool use

FRAISA ToolExpert® 2.0 – the new online cutting data tool for optimum tool use

In the era of Industry 4.0, you need to be productive and work with precision at all times. To help…

The new Favora tool concept

The new Favora tool concept

Designed to run +50 % tool life

HX and XSpeed-H comfort zone 50 < 60 HRC

HX and XSpeed-H comfort zone 50 < 60 HRC

New performance horizons for machining high-hard steels

Microcut – focused on the essentials

Microcut – focused on the essentials

Stability in its most beautiful form for machining materials in the hardness range up to 55 HRC

SX – High Dynamic Cutting (HDC)

SX – High Dynamic Cutting (HDC)

New productivity and tool life horizons for machining stainless steels

Xtap – one tool for everything

Xtap – one tool for everything

The innovative all-rounder for steel and stainless steels

Technical milling advice and tools for your success

Technical milling advice and tools for your success

FRAISA USA in New Brighton, Minnesota, supports our customers and distribution partners in the United…

SX – for machining stainless steels

SX – for machining stainless steels

Maximum performance and process reliability

E-Cut – efficient and economical

E-Cut – efficient and economical

High performance machining made easy

AX-FPS – groundbreaking concept

AX-FPS – groundbreaking concept

New performance horizons for high-performance milling of aluminum

FRAISA Annual Report 2022/2023

FRAISA Annual Report 2022/2023

Annual Report of the FRAISA Group 2022/23.

FRAISA Annual Report 2021/2022

FRAISA Annual Report 2021/2022

Annual Report of the FRAISA Group 2021/22.

FRAISA Annual Report 2020/2021

FRAISA Annual Report 2020/2021

Annual Report of the FRAISA Group 2020/21.

FRAISA Annual Report 2019/2020

FRAISA Annual Report 2019/2020

Annual Report of the FRAISA Group 2019/20.

FRAISA Annual Report 2018/2019

FRAISA Annual Report 2018/2019

Annual Report of the FRAISA Group 2018/19.

FRAISA Annual Report 2017/2018

FRAISA Annual Report 2017/2018

Annual Report of the FRAISA Group 2017/18.

FRAISA Annual Report 2016/2017

FRAISA Annual Report 2016/2017

Annual Report of the FRAISA Group 2016/17.

FRAISA Annual Report 2015/2016

FRAISA Annual Report 2015/2016

Annual Report of the FRAISA Group 2015/16.

FRAISA Annual Report 2014/2015

FRAISA Annual Report 2014/2015

Annual Report of the FRAISA Group 2014/15.

FRAISA Annual Report 2013/2014

FRAISA Annual Report 2013/2014

Annual Report of the FRAISA Group 2013/14.

Fraisa USA ReTool / ToolService Form

Fraisa USA ReTool / ToolService Form

In order to ensure an optimal FRAISA USA ReTool service intially we require the following information.

cron