Highly productive 3D milling technology with SpheroX milling cutters
The new generation of SpheroX milling cutters opens up some impressive new prospects: Where classic HSC machining reaches its limits, new performance horizons can be opened up with HDC machining processes. The SpheroX has been designed for HDC processes and impresses with its high stock removal rates, which can significantly increase productivity compared to conventional milling cutters.
The new SpheroX milling cutters have been developed specifically for high-performance roughing and finishing of hard and high-hard steels such as HSS. The tools provide excellent results in the machining of deep-drawn, injection, and die-cast molds, but also in the forming of solid stock.
The range of materials they can be used for includes steels in the hardness range from 50 to 70 HRC. The spherical radius, with a tight tolerance of +/–0.005 mm, is the basis for the dimensional accuracy of the new SpheroX milling cutters.
Thanks to the four cutting edges, high feed rates can be achieved. Penetration operations with a penetration angle of up to 5° are also no problem for these new tools thanks to their special edge geometry. The cutting edge length and the flute geometry facilitate HDC machining with high axial infeeds at very high feed rates. This means that even deep cavities can be machined extremely efficiently.
The new DURO-SI coating reduces tool wear and guarantees long-term dimensional accuracy of the workpiece. This results in a large increase in productivity. The new SpheroX generation features universal utilizability, high productivity and long tool life.
- High productivity thanks to higher axial infeed and very high feed rates.
- Improved component quality thank to the highprecision ball with a tolerance of just +/–0.005 mm. The shank is ground to an h4 tolerance.
- Low tool costs thanks to improved wear resistance and high surface finish qualities, which significantly shorten subsequent polishing processes.
- Universal application range thanks to improved penetration capabilities and the tools’ excellent suitability for HSC and HDC strategies.
High-performance tools for machining hardened steels
A key quality feature of the new SpheroX ball nose end milling toolis the DURO-SI coating specially developed for machining hardened steels. In combination with cutting edge conditioning, this significantly increases the tool’s performance capabilities. High feed rates with simultaneous high infeeds are no problem thanks to the four cutting edges. These four cutting edges, in combination with the variable helix, also ensure incomparably smooth running compared to double-edged tools.
Higher chip removal rate
The number of cutting edges on SpheroX milling cutters has been doubled compared to conventional ball nose end cutters – enabling the feed rate to be increased by more than 50%. The four cutting edges ensure shorter cutting interruptions, smoother movement of the tool and better surface finish qualities for the workpieces.
Reduced tool costs
The DURO-SI coating has been specially developed for machining hard and high-hard materials. In addition to outstanding hardness, it features an incomparably high resistance to oxidation. This results in brilliant wear resistance in high-hard materials, which extends the service life of the tool and significantly reduces the associated tool costs. Compared to tools with conventional coatings, the SpheroX cutters can therefore be used at considerably higher temperatures, which means better cutting results and productivity. The droplet-free cutting face features reduced friction, which in turn promotes rapid chip removal from the flute.
Great flexibility of use
An expanded field of application for the new generation of SpheroX milling cutters: Due to the large cutting edge length and the variable helix, the tools also master penetration and the modern HDC machining strategy perfectly. This can be used to create flat, relief-like shapes as well as deep outer and inner cavities quickly and cost-effectively.
Due to their specially designed edge geometry, the milling cutters are able to perform penetration operations with penetration angles of up to 5° without any problems. And it goes without saying that the cutters are also highly capable of implementing conventional machining strategies.
Improved component quality
When finishing, too, the four cutting edges, which go all the way to the center, achieve better results in terms of surface finish quality. The optimized edge geometry allows much higher feed rates when prefinishing than conventional double-edged tools do. Precise dimensional accuracy of the workpiece is ensured by the high precision of the radius.
Machining strategy for components made of hard to high-hard steels
Flexible application options when machining complex, hardened molded components
FRAISA ReTool® – Industrial tool reconditioning with performance guarantee
FRAISA ReTool® offers an all-round service that restores your used tools to their original performance level and optimizes your processes. FRAISA and third-party tools are reconditioned using the very latest technology – and in a resource-friendly way. The outcome: mint-condition tools as productive as they were the first day they were used. And to make things even better, your level of investment is lower than if you were to buy new tools, you increase your productivity and you save costs.
FRAISA ReTool® – a performance guarantee founded on integrated development of the tools and the reconditioning process
We guarantee that following their reconditioning with FRAISA ReTool®, your used tools will be restored to the original performance level they had when new. Our ability to provide this performance guarantee is a priority of our team of experts right from very early on in product development.
That’s why the development of the reconditioning process is an integral part of the development phase, alongside the actual product tests and calculating the cutting data. Strict rules apply: the FRAISA ReTool® process is approved only if we are able to fulfil our performance guarantee 100%.
|SpheroX Ball Nose End Mill|
Do you have questions about our products?
We are happy to help!
Tel.: +41 (0)32 617 42 42
Tel.: +49 (0)2154 489 84-0
7, Rue de Lombardie
ZA Les Pivolles
Tel.: +33 (0)4 72 14 57 00
FRAISA Italia s.r.l.
Via Grosio 10/8
Tel.: +39 02 33406 086
FRAISA Hungária Kft.
Vásárhelyi Pál utca 3
Tel.: +36 47 312 686
FRAISA USA, Inc.
711 5th Street SW, Suite 1
New Brighton, MN 55112
Tel.: +1 (651) 636-8488
FRAISA (Shanghai) Co., Ltd
A202, Building 3, No.526,
3rd East Fute Road
Shanghai Pilot Free Trade Zone
Tel.: +86 21 5820 5550